Hi I have the Drum Kit kit AI and have doawnloaded the sketch and Arduino software. (Running on windows 7)
I have a CP210x USB to UART Bridge Virtual COM Port driver loaded and can see "COM3" in the Arduino software. The power light is lit on the Drum Kit A1 board (powered from the USB).
When I try uploading the sketch using File, Upload I get the following error
avrdude: stk500_getsync(): not in sync: resp=0x00
and no transmit lights or anything. I have tried different board settings in the arduino software but this makes no difference. Please can you advise if I am missing something in the steps.