Upload baud rate?

Upload baud rate?

Postby gerritv » Wed Mar 14, 2012 7:35 pm

Hi,
I just built my first Sippino last night. But I can't find info on the upload baud rate anywhere. Tried 9600, 57600 to no avail.
1) What is the upload baud rate for the loader?
2) Do I need to pull DTR high? Low?
3) Specifically which Arduino do I set the IDE to, is it Mini 328?

Thx,
Gerrit
gerritv
 
Posts: 1
Joined: Wed Mar 14, 2012 7:27 pm

Re: Upload baud rate?

Postby Spike » Tue Dec 18, 2012 1:46 am

The ATmegas on the Sippino come with the Duemilanove Atmega w/328 bootloader. If you are using the Arduino IDE, simply choose this board and in the Serial Port menu choose the FTDI (or other) serial interface you are using. The IDE will choose the correct setting for you.

Note: if you have a Sippino 168 then choose Duemilanove Atmega w/168.
Spike
Site Admin
 
Posts: 95
Joined: Tue Feb 16, 2010 12:51 pm


Return to Sippino



Who is online

Users browsing this forum: No registered users and 1 guest

cron